Proceedings of the ICTAM

Proceedings of the International Congresses on Theoretical and Applied Mechanics (ICTAM)

Until September 4, 1964 the organization of the International Congresses for Applied Mechanics was supervised by the “International Committee for the Congresses of Applied Mechanics” and for each Congress the organization was separately entrusted to a local Organizing Committee who also undertook the publication of the proceedings. Consequently, there is no central point from which proceedings may be ordered, and for each volume, application must be made to the publishers who took care of that particular volume.
Since September 4, 1964 the same task will be fulfilled by the Standing Congress Committee of IUTAM, and local Organizing Committees to be established.
The titles of the volumes and the names of the publishing firms are given below:

24th International Congress of Theoretical and Applied Mechanics (ICTAM), Montreal (Canada), August 2016.

The Proceedings, edited by J.M. Floryan, have been published by Procedia IUTAM, 2017. The Proceedings are open access: http://www.sciencedirect.com/science/journal/22109838

All 2-page papers presented during ICTAM 2016 are collected in the book entitled “Contributions to the Foundations of Multidisciplinary Research in Mechanics”, edited by J.M. Floryan and published by IUTAM, 2017. ISBN NR16-127/2016E-EPUB. The link is: http://iutam.org/publications/ictam-proceedings/ictam_2016/

23rd International Congress on Theoretical and Applied Mechanics (ICTAM), Beijing (China), August 2012.

The Proceedings, entitled “Mechanics for the World” and edited by Y. Bai, J. Wang and D. Fang, have been published by Procedia IUTAM, 2014. The Proceedings are open access: www.sciencedirect.com/science/journal/22109838/10

22nd International Congress on Theoretical and Applied Mechanics (ICTAM), Adelaide (Australia), August 2008.

The Proceedings, entitled “Mechanics Down Under” and edited by J. Denier and M. Finn, have been published by Springer, 2013. The link is: www.springer.com/engineering/mechanical+engineering/book/978-94-007-5967-1

21th International Congress on Theoretical and Applied Mechanics (ICTAM), Warsaw (Poland), 15-21 August 2004.

The Proceedings, entitled “Mechanics of the 21st Century” and edited by W. Gutkowski and T.A. Kowaleski, have been published by Springer, Dordrecht, The Netherlands, 2005.
ISBN 1-4020-3456-3.

20th International Congress on Theoretical and Applied Mechanics (ICTAM), Chicago (USA), 27 August-2 September 2000.

The Proceedings, entitled “Mechanics for a New Millenium” and edited by H. Aref and J.W. Phillips, have been published by Kluwer Academic Publishers, Dordrecht, The Netherlands, 2001.
ISBN 0-7923-7156-9.

19th International Congress on Theoretical and Applied Mechanics (ICTAM),
Kyoto (Japan), 25-31 August 1996.

The Proceedings, edited by T. Tatsumi, E. Watanabe, T. Kambe, have been published by Elsevier Science Publishers, Amsterdam, 1997.
ISBN 0-444-82446-4.

18th International Congress on Theoretical and Applied Mechanics (ICTAM),
Haifa (Israel), 22-28 August 1992.

The Proceedings, edited by S.R. Bodner, J. Singer, A. Solan and Z. Hashin, have been published by Elsevier Science Publishers, Amsterdam, 1993.
ISBN 0-444-88889-6.

17th International Congress on Theoretical and Applied Mechanics (ICTAM),
Grenoble (France), 21-27 August 1988.

The Proceedings, edited by P. Germain, M. Piau and D. Caillerie, have been published by North-Holland, Elsevier Science Publishers, Amsterdam, 1989.
ISBN 0-444-87302-3.

16th International Congress on Theoretical and Applied Mechanics (ICTAM),
Lyngby (Denmark), 19-25 August 1984.

The Proceedings, edited by F.I. Niordson and N. Olhoff, have been published by Elsevier Science Publishers (North-Holland), Amsterdam, 1985.

15th International Congress on Theoretical and Applied Mechanics (ICTAM),
Toronto (Canada), 17-23 August 1980

The Proceedings, edited by F.P.J. Rimrott and B. Tabarrok, have been published by North-Holland Publishing Company, Amsterdam-New York-Oxford, 1980.

14th International Congress on Theoretical and Applied Mechanics (ICTAM),
Delft (Netherlands), 30 August-4 September 1976.

The Proceedings, edited by W.T. Koiter, have been published by North-Holland Publishing Company, Amsterdam-New York-Oxford, 1976, 1977.

13th International Congress on Theoretical and Applied Mechanics (ICTAM),
Moscow (USSR), 21-26 August 1972.

The Proceedings, edited by E. Becker and G.K. Mikhailov, have been published by Springer-Verlag, Berlin (Germany), 1973.

12th International Congress on Theoretical and Applied Mechanics (ICTAM),
Stanford, Cal. (USA), 26-31 August 1968.

The Proceedings, edited by M. Hetényi and W.G. Vincenti, have been published by Springer-Verlag, Berlin (Germany), 1969.

11th International Congress on Theoretical and Applied Mechanics (ICTAM),
Munich (Germany), 30 August-5 September 1964.

The Proceedings, edited by H. Görtler, have been published by Springer-Verlag, Heidelberger Platz 3, Berlin (Germany), 1966.

10th Congress, Stresa (Italy), 31 August-7 September 1960.

Proceedings published by the Consiglio Nazionale delle Ricerche, Piazelle delle Science 7,
Roma (Italia), printed by Elsevier Publishing Company, Amsterdam-New York, 1962.

9th Congress, Brussels (Belgium), 5-13 September 1956.

Proceedings published by the Organizing Committee (Vol. I to Vol. VIII). Free University of Brussels, 50, avenue Franklin-Roosevelt, Brussels (Belgium), 1957.

8th Congress, Istanbul (Turkey), 20-28 August 1952.

Proceedings published by the Organizing Committee (Vol. I, Vol. II). Faculty of Sciences, University of Istanbul, P.O. Box 245, Istanbul (Turkey), 1953.

7th Congress, London (UK), 5-11 September 1948.

Proceedings of the Seventh International Congress for Applied Mechanics, 1948, published by the Organizing Committee (Introduction, Vol. I, Vol. II – Parts 1 and 2, Vol. III, Vol. IV).

6th Congress, Paris (France), 22-29 September 1946.

Proceedings not published (was given in the hands of Gauthier-Villars, Paris).

5th Congress, Cambridge (Massachusetts, USA), 12-16 September 1938.

Proceedings of the Fifth International Congress for Applied Mechanics, held at Harvard University and the Massachusetts Institute of Technology, Cambridge, Massachusetts, September 12-16, 1938, edited by J.P. den Hartog and H. Peters (one vol.), John Wiley and Sons, Inc., New York (USA), and Chapman and Hall Ltd., London (UK), 1939.

4th Congress, Cambridge (UK), 3-9 July 1934.

Proceedings of the Fourth International Congress for Applied Mechanics, Cambridge, UK, 3-9 July, 1934 (one vol.). University Press, Cambridge (UK), 1935.

3rd Congress, Stockholm (Sweden), 24-29 August 1930.

Verhandlungen – Compte rendus – Proceedings of the 3rd International Congress for Applied Mechanics, herausgegeben von A.C.W. Oseen und W. Weibull (3 vol.). AB. Sveriges Litografiska Tryckerier, Stockholm, 1931.

2nd Congress, Zürich (Switzerland), 12-17 September 1926.

Verhandlungen – Comptes rendus – Proceedings of the 2nd International Congress for Applied Mechanics, Zürich, 12-17 September 1926, herausgegeben von E. Meissner (one vol.). Orell Füssli Verlag, Zürich und Leipzig, 1927.

1st Congress, Delft (Netherlands), 22–26 April 1924.

Proceedings of the First International Congress for Applied Mechanics, Delft 1924, edited by C.B. Biezeno and J.M. Burgers (one vol.). Technische Boekhandel en Drukkerij J.Waltman Jr., Delft, 1925. No more copies are available for sale at Delft.